WAYS TO IMPROVE THE EFFICIENCY OF HEAT EXCHANGE UNITS IN THE INDUSTRIAL ENTERPRISES

Erkinov A. K.,Jobborova M. A.,Rajabova S. R.

Authors

Erkinov A. K.,Jobborova M. A.,Rajabova S. R. (Tashkent Chemical-Technological Institute,)

Keywords:

heat exchanger, energy efficiency, industrial processes, waste heat, recuperation, technological devices, energy efficiency.

Abstract

This article analyzes the technological significance of heat exchange devices used in industrial enterprises, their role in energy efficiency improvement and modern modernization methods. The principles of operation of heat exchangers, the possibility of reducing energy losses at industrial enterprises and cost efficiency of waste heat recovery technologies are studied on the basis of scientific sources. The results of the study show that the introduction of highly efficient heat exchange systems in industrial enterprises makes it possible to reduce energy consumption by up to 15–30%.

References

International Energy Agency (IEA). Energy Efficiency 2022 Report. Paris: IEA Publications, 2022.

Shah R.K., Sekulić D.P. Fundamentals of Heat Exchanger Design. New Jersey: John Wiley & Sons, 2003.

Kakaç S., Liu H., Pramuanjaroenkij A. Heat Exchangers: Selection, Rating and Thermal Design. 3rd Edition. CRC Press, 2012.

Hewitt G.F. Heat Exchanger Design Handbook. Boca Raton: CRC Press, 2008.

Wang L., Sundén B., Manglik R.M. Plate Heat Exchangers: Design, Applications and Performance. WIT Press, 2007.

Bergles A.E. “Techniques to Augment Heat Transfer.” Handbook of Heat Transfer Applications, McGraw-Hill, 2015.

Klemeš J.J., Arsenyeva O., Kapustenko P. “Heat Exchanger Network Optimization and Heat Recovery in Industrial Processes.” Energy Journal, Vol. 45, No. 6, 2021, pp. 1254–1268.

Khadjibaev A., Erkinov A., Shokirov A. INVESTIGATION OF THE PROCESS OF GRINDING OF SOLID OIL REFINERY WASTE IN THE IMPACT CENTRIFUGAL MILL //International Journal of Artificial Intelligence. – 2025. – Т. 1. – №. 2. – С. 478-482. Li J. et al. Virtual Laboratory Effectiveness in Engineering Education. PLOS ONE, 2024.

Tokhtasheva M., Erkinov A. THE STRUCTURE, STRUCTURE AND APPLICATION OF 3D PRINTER FILAMENTS: ANALYSIS AND PROSPECTS //Journal of Applied Science and Social Science. – 2025. – Т. 1. – №. 2. – С. 796-799. Suhail N. et al. Augmented Reality in STEM Education. Frontiers in Education, 2024.

Lyamin A., Xadjibayev A., Erkinov A. STUDYING THE THERMAL CONDUCTIVITY OF MATERIALS //International Journal of Artificial Intelligence. – 2025. – Т. 1. – №. 3. – С. 328-336. Tene T. Integration of VR Technologies in Technical Education. Frontiers in Education, 2024.

Smith R. Chemical Process Design and Integration. 2nd Edition. Wiley, 2016.

Journals:

Applied Thermal Engineering

International Journal of Heat and Mass Transfer

Energy

Chemical Engineering Research and Design

Heat Transfer Engineering