DETAIL CASTING USING SECONDARY METALS IN FOUNDRY ACCORDING TO GOOST MARKINGS

S. Atakhonova

Authors

S. Atakhonova Associate Professor , Andijan State Technical Institute

Keywords:

foundry, secondary metal, GOST, detail, steel, iron, alloying, heat treatment, quality, mechanical properties, service life, material optimization, casting technology, production, cost, reliability, chemical composition, standard, metal alloy, analysis

Abstract

This article studies the scientific and technological aspects of casting parts in accordance with GOST standards using secondary metals in foundry. During the study, the influence of the chemical composition, alloying elements and heat treatment of secondary metals on the quality and mechanical properties of the part was analyzed. In experimental work, samples made from steel and iron alloys were tested for compliance with GOST standards. The results showed that the use of secondary metals reduces production costs and extends the service life of the part. At the same time, quality and reliability can be ensured through material optimization and control of casting technology

References

Bochkov, V. S.Increasing the wear resistance of excavator working parts. Hardening Technologies and Coatings. 2020;16(7):306–308.

Atakhanova, S. K., Kasimov, U. K., Karimov, R. I., & Khasanov, B. M.Improving the Wear Resistance of Mining Excavator Blades. ISSN: 2776-0979, Vol. 2, Issue 5, 2021.

Latupeirissa, D., Setyana, L. D., Santoso, N., Fuadi, R., Hanif, D., & Nur Ichzan, F.Enhancing Wear Resistance of PC200 Excavator Bucket Teeth Made from Low Alloy Steel Through Heat Treatment. 10th Int. Conf. on Science and Technology, 2021.

Wang, Z., et al. Abrasive Wear Properties of Wear-Resistant Coating on Bucket Tooth Substrates. Materials. 2022;17(7):1495.

Ergashbaev, M.Sh. D., & Ermatov, N . M. Analysis of wear of a mining excavator bucket for further lining and increasing service life. XIII Int. Sci.–Pract. Conf., 2023.

Resource-saving technology of heat treatment of parts that quickly wear out in mining equipment. Results in Engineering. 2023;103649.

Wang, S., Zheng, Z., Wang, J., Long, J., Luo, Z., Zheng, K., & Pokrovsky, A. I.Recent Advances in Wear-Resistant Steel Matrix Composites: A Review. Materials Review. 2024.

Nesterenko, Y. N.Development of composite materials for the manufacture of high-wear-resistant excavator buckets. Construction and Road Machinery. 2024;68(5-6):50–62.

Global Wear Resistant Steel Market Research Report 2025 (Status and Outlook). Bosson Research. 2025.

Global Wear Resistant Steel Plate for Mining Market Size, Share & Trends Analysis 2026-2032. PW Consulting Report. 2026.