THE COMPOSITION OF TECHNOLOGICAL SOLUTIONS CONTAINING LOW-CONCENTRATION METALS AND THE POSSIBILITIES FOR METAL EXTRACTION
Keywords:
technological solution, SEM, XRF, dust, gas, sorption, extraction, ion flotation.Abstract
The continuous growth in the production of precious metals has led to an increase in the generation of technogenic wastes and technological solutions, which has created the need for their processing. This process is considered not only as an additional source of metal recovery, but also as an important factor in reducing the production cost of final products. In this study, investigations were carried out on the sources of formation, composition, and processing methods of wash solutions generated in the sulfuric acid production unit of a copper smelting plant. The composition of the samples was analyzed using modern analytical techniques, including X-ray fluorescence (XRF), inductively coupled plasma–mass spectrometry (ICP-MS), and scanning electron microscopy (SEM).
References
Khasanov, A.S., Vokhidov, B.R., & Ostonov, Sh.Q. (2024). Recovery of valuable components from wastes of a sulfuric acid production plant. Journal of Advances in Engineering Technology, 3(15), 109–112. https://doi.org/10.24412/2181-1431-2024-3-109-112
Ostonov, Sh.Q., Khasanov, A.S., Vokhidov, B.R., & Abdullayev, Z.O. (2024). Investigation of the parameters of percolation acid selective leaching of chlorinated calcines. Digital Technologies in Industry, 2(3), 27–33. ISSN 3030-3214.
Ostonov, Sh.Q., Kalonov, A.K., Khuzhakulov, N.B., & Nasirova, N.R. (2023). Investigation of the recovery of heavy non-ferrous metals from wastewater of copper production. Mining Bulletin of Uzbekistan, 4(95), 64–68.
