DEVELOPMENT OF TECHNICAL SOLUTIONS FOR INCREASING THE SERVICE LIFE OF THE BODY OF QUARRY HIGHWAYS

Gaffarov Azamat Alisherovich

Authors

Gaffarov Azamat Alisherovich Basic doctoral student of Navoi State Mining and Technological University

Keywords:

Quarry dump truck, body design, ANSYS stress analysis, unloading angle, protective linings, rubber coating, stress concentration, impact loads, BelAZ dump truck body, maintenance strategies.

Abstract

In this article, the theory of dump truck body loads, the calculation of forces influencing the operational indicators of dump truck bodies using physical geometric modeling, increasing the efficiency of dump truck body operation based on the improvement of dump truck bodies, the development of a rubber body covering for dump trucks, methods of its use, and economic indicators are presented.

References

A.G.Konstandopoulos, E.Skaperdas, J.Warren, R.Allansson. Optimized filter design and selection criteria for continuous regeneration diesel particle traps // SAE Paper. 1999: - No. 1999-01-0468. - 12 p.

R.H. Hammerle, D.A. Ketcher, R.W. Horrocks et al. Emissions from diesel vehicles with and without lean NOdx and oxidation catalysts and particle traps // SAE Paper. 1995. - No 952391-21 p.

Keith Hadock Giant earthmovers: An illustrated history. / K. Hadock. St. Paul: MBI Publishing CoMPany. - 224 p.

Kazakov A., Foster D.E. Modeling of soot formation during diesel fuel combustion using a multi-step phenomenological model // SAE Paper. 1998. - No 982463.-15p.

Khan I.M., Greeves G. A method for calculating and combustion of soot in diesel engines // Heat transfer in flame / Eds. N.M. Afghan, J.M. Beer. New York: John Wiley & Sons. P.381-404.

Gaffarov A.A., Atakulov L.N., Khaydarov Sh.Kh. Theory of forces acting on quarry dump trucks in the horizontal plane during operation. // https://scientific-jl.org; No 51_Collection 3_December-2024

Gaffarov A.A., Atakulov L.N., Kahharov O.O. Analysis of pressures generated by installing additional air filters on heavy-duty dump trucks in the mining industry. // Development of science, 2025, p. 5.

Gaffarov A. A. Increasing the Efficiency of Operating Parameters of Auto-S dump trucks. International Journal of Advanced Research in Science, Engineering and Technology Vol. 12, Issue 5, May 2025.

Gaffarov A.A., Atakulov L.N. Increasing the efficiency of the operational indicators of dump trucks // Scientific and Technical Journal "Digital Technologies in Industry" No. 3 2025.

Gaffarov A.A., Atakulov L.N. Increasing the efficiency of body operation based on the improvement of quarry dump truck bodies (using the Ansys software). // Development of science.

Rabatuly M., Myrzathan S.A., Toshov J.B., Nasimov J., Khamzaev A. Views on drilling effectiveness and sampling estimation for solid ore minerals. Комплексное Использование Минерального Сырья. №1(336), 2026. https://doi.org/10.31643/2026/6445.01

Toshov J.B., Rabatuly M., Khaydarov Sh., Kenetayeva A.A., Khamzayev A., Usmonov M., Zheldikbayeva A.T. Methods for Analysis and Improvement of Dynamic Loads on the Steel Wire Rope Holding the Boom of Steel Wire Rope Excavators. Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources 2026; 339(4):87-96 https://doi.org/10.31643/2026/6445.43

Khamzaev A.A., Mambetsheripova A., Arislanbek N. Thyristor-based control for high-power and high-voltage synchronous electric drives in ball mill operations/ E3S Web Conf. Volume 498, 2024/ III International Conference on Actual Problems of the Energy Complex: Mining, Production, Transmission, Processing and Environmental Protection (ICAPE2024) DOI: https://doi.org/10.1051/e3sconf/202449801011

Toshov B.R., Khamzaev A.A. Development of Technical Solutions for the Improvement of the Smooth Starting Method of High Voltage and Powerful Asynchronous Motors/AIP Conference Proceedings 2552, 040018 (2023); https://doi.org/10.1063/5.0116131 Volume 2552, Issue 1; 5 January 2023

Toshov B.R., Khamzaev A.A., Sadovnikov M.E., Rakhmatov B., Abdurakhmanov U./ Automation measures for mine fan installations/ SPIE 12986, Third International Scientific and Practical Symposium on Materials Science and Technology (MST-III 2023), 129860R (19 January 2024); doi: 10.1117/12.3017728. Third International Scientific and Practical Symposium on Materials Science and Technology (MST-III 2023), 2023, Dushanbe, Tajikistan.

Toshov B.R., Khamzaev A.A., Namozova Sh.R.Development of a circuit for automatic control of an electric ball mill drive. AIP Conference Proceedings 2552, 040017 (2023) Volume 2552, Issue 1; 5 January 2023