RESEARCH ON REDUCING FIBER LOSS IN THE COTTON SEPARATION PROCESS

Authors

Salokhiddinova Makhliyo Nurmukhammad qizi Doctor of Technical Sciences ( DSc ), Associate Professor of the Department of Metrology and Standardization, Namangan State Technical University

Keywords:

cotton, seed, fiber, air, separator, free fiber, separator, vacuum valve, mesh surface, guide.

Abstract

This article describes research aimed at drastically reducing the amount of free fibers escaping with air from a separator machine installed in the technological process of cotton ginning enterprises. In order to minimize the adhesion of cotton to the separator mesh surface, it is proposed to install trapezoidal guides on the separator device. To determine the effectiveness of the proposed guides, tests were conducted on 20 cm and 40 cm long variants and the corresponding results were obtained. The experimental results showed that when trapezoidal guides were installed, the impact of cotton pieces on the mesh surface was reduced by 35-40%. This ensures that the main part of the cotton raw material falls correctly into the vacuum valve, increasing the efficiency of the separator from air.

References

Salokhiddinova, M. N., Muradov, R. M., & Mamatkulov, A. T. (2017). Investigation of Separating Small Impurities and Heavy Compounds Using the Cotton Separator Equipment. American Journal of Science, Engineering and Technology, 2(2), 72-76.

Salomova, M., Salokhiddinova, M., Muradov, R., & Kushimov, A. Z. (2023). How to increase the effect radius of the cotton transport process in a mobile device. PROBLEMS IN THE TEXTILE AND LIGHT INDUSTRY IN THE CONTEXT OF INTEGRATION OF SCIENCE AND INDUSTRY AND WAYS TO SOLVE THEM:(PTLICISIWS-2022), 2789(1), 040045.

Mardonov, B. M., Usmanov, X. S., & Saloxiddinova, M. (2019). Theoretical analysis of the process of isolating impurities from the raw cotton stream as a result of vibration of the inclined plane. Textile Journal of Uzbekistan, 1(1), 3.

Qizi, S. M. N., Muradovich, M. R., Ismonovich, K. A., & Mardanovich, M. B. (2018). The Shortfalls of the Vacuum Valve Cotton Separator. American Journal of Science and Technology, 5, 49-55.

Qizi, S. M. N., Sharipovich, K. S., Qizi, K. M. Y., & Muradovich, M. R. (2020). Ways to Reduce the Impact of Cotton in the Separator Worker Chamber. International Journal of Psychosocial Rehabilitation, 24(04), 6494-6501.

Qizi, S. M. N., & Muradov, R. (2022). Theoretical research of the process of separating impurities from cotton flow on the vibrating inclined mesh surface. Open Journal of Science and Technology, 5(1), 25-35.

Salokhiddinova, M., & Muradov, R. (2022, November). Research to reduce seed and fiber strain in cotton separator. In AIP Conference Proceedings (Vol. 2650, No. 1, p. 030018). AIP Publishing LLC.

Makhliyo, S., & Rustam, M. (2022). Methods for increasing the efficiency of cleaning the transfer device. Engineering, 14(1), 54-61.

Salokhiddinova, M., & Muradov, R. (2022). Methods for Increasing the Efficiency of Cleaning the Transfer Device. Engineering, 14, 54-61.

Salokhiddinova, M., & Muradov, R. (2024). 677.21 WAYS TO IMPROVE THE EFFICIENCY OF MOVING DEVICE USED IN AIR TRANSPORTATION OF COTTON: Pneumotransportation. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 9(2), 27-32.

Salokhiddinova, M. N., Muradov, R. M., & Iskandarova, M. A. (2023). Ways то increase the efficiency of the drive device.

Downloads

Published

2025-11-02

How to Cite

Salokhiddinova Makhliyo Nurmukhammad qizi. (2025). RESEARCH ON REDUCING FIBER LOSS IN THE COTTON SEPARATION PROCESS. Ethiopian International Journal of Multidisciplinary Research, 12(10), 790–794. Retrieved from https://eijmr.org/index.php/eijmr/article/view/3815