VOLUME STAMPING UNDER ISOTHERMAL CONDITIONS

Authors

  • BoboyevX.X.1 , Nurullayev R.T.2 , Saydullayev A.Sh.3 Dean of the Faculty of Energy and Mechanical Engineering, Almalyk Branch of Tashkent State Technical University named after Islam Karimov Assistant Lecturer, Department of Mechanical Engineering Technology, Almalyk Branch of Tashkent State Technical University named after Islam Karimov Student of group 7b-23MT, Department of Mechanical Engineering Technology, Almalyk Branch of Tashkent State Technical University named after Islam Karimov

Keywords:

Isothermal stamping, deformation, titanium alloys, forming force, glass lubrication, strain rate, heat-resistant materials, plasticity, press forging, metal forming.

Abstract

This article discusses the technological and structural advantages of isothermal stamping compared to conventional stamping methods. The study highlights the reduction in specific deformation force and the uniform distribution of heat in the workpiece under isothermal conditions, which contribute to improved workpiece quality and mechanical properties. Special attention is given to the influence of strain rate, temperature, and lubrication methods—particularly the use of glass coatings—on the forming of titanium and hard-to-deform alloys. The application of isothermal forming techniques in the production of complex-shaped parts, especially from low-plasticity and heat-resistant materials, is also addressed.

References

А.А.Бочвар, 3.А.Свидерская,. Явление сверхпластичности в цинк-алюминиевых сплавах // Изв. АН СССР, ОТН, 1945. - № 9,- С. 821-824.

Строганов Г.Б., Кайбышев О.А., Фаткулин О.Х., Мартынов В.Н. Сверхпластичност и износостойкост в машиностроении. «Алтекс». Москва, 2002 г. 320 с.

О.А. Кайбышев. Сверхпластичност промышленных сплавов. - M.: Металлургия, 1984. - 362 с.

Matmurodov, F. M., Boboyev, X. X., Nugmanov, I. N., & Mamirov, S. S. (2023, September). Analytical dynamic modeling of damping of a multi-hierarchical mechanical system and mobile power engine shaft with the help of multi-mass rheological models. In Journal of Physics: Conference Series (Vol. 2573, No. 1, p. 012044). IOP Publishing.

АMatmurodov, F. M., Turapov, E. I., Abduvaliyev, U. A., Boboyev, X. X., Abdurakhmanova, M. M., & Bakirov, F. A. (2023, March). Creating an innovative multi-operating wide-covered universal frame with different replacement machine. In American Institute of Physics Conference Series (Vol. 2612, No. 1, p. 050040).

УА Абдувалиев, ШШЎ Мамиров, РТЎ Нуруллаев - Universum: технические науки, 2023. https://cyberleninka.ru/article/n/vliyanie-sherohovatosti-poverhnosti-shpindeley-na-zazelenenie-i-stabilnost-raboty-hlopkouborochnogo-apparata

U Abduvaliev, A Jumaev, R Nurullaev, A Ashirov… - International Conference on Reliable Systems …, 2024 , https://link.springer.com/chapter/10.1007/978-3-031-70670-7_25

U Abduvaliev, A Jumaev, R Nurullaev, S Jakhonov… - E3S Web of Conferences, 2024 . E3S Web of Conferences, https://www.e3s-conferences.org/articles/e3sconf/abs/2024/78/e3sconf_agritech-x_04013/e3sconf_agritech-x_04013.html

Р.Т. Нуруллаев. Теоретико-экспериментальные исследовния активности шпинделей. Материалы международной конференции. Наманган 23-24 сентября 2022 г.

Абдувалиев У.А., Мамиров Ш.Ш., Нуруллаев Р.Т. ВЛИЯНИЕ ШЕРОХОВАТОСТИ ПОВЕРХНОСТИ ШПИНДЕЛЕЙ НА ЗАЗЕЛЕНЕНИЕ И СТАБИЛЬНОСТЬ РАБОТЫ ХЛОПКОУБОРОЧНОГО АППАРАТА // Universum: технические науки : электрон. научн. журн. 2023. 5(110). с.46-54 URL: https://7universum.com/ru/tech/archive/item/15576

Абдувалиев У.А., Нуруллаев Р.Т., Жахонов Ш.А., Влияние Физико-Механических Свойств Хлопчатника И Рельефа Поля На Стабильность Работы Шпинделей Хлопкоуборочной Машины. Vol. 44 (2024): Miasto Przyszłości. https://miastoprzyszlosci.com.pl/index.php/mp/article/view/2391

Абдувалиев У.А., Нуруллаев Р.Т., Жахонов Ш.А., ACADEMIC INTERNATIONAL CONFERENCE ON MULTI-DISCIPLINARY STUDIES AND EDUCATION. ВЛИЯНИЕ ШЕРОХОВАТОСТИ ПОВЕРХНОСТИ МЕТАЛЛА НА КОЭФФИЦИЕНТ ТРЕНИЯ ХЛОПКА-СЫРЦА ПРИ РАЗЛИЧНЫХ НОРМАЛЬНЫХ ДАВЛЕНИЯХ φ(N). С.69-73 https://aidlix.com/index.php/us/article/view/40

Абдувалиев У.А., Нуруллаев Р.Т., SHPINDEL SIRTIDAGI TISHLARNING JOYLASHISHI ZICHLIGI VA BIR TEKISDALIGINI ANIQLASH. МЕХАНИКА ВА ТЕХНОЛОГИЯ ИЛМИЙ ЖУРНАЛИ, 2023, № 2 (11) С.46-54 https://mextex.uz/file/mex-tex-14.pdf

Downloads

Published

2025-06-12

How to Cite

BoboyevX.X.1 , Nurullayev R.T.2 , Saydullayev A.Sh.3. (2025). VOLUME STAMPING UNDER ISOTHERMAL CONDITIONS. Ethiopian International Journal of Multidisciplinary Research, 12(06), 162–167. Retrieved from https://eijmr.org/index.php/eijmr/article/view/3279

Issue

Vol. 12 No. 06 (2025): Ethiopian International Journal of Multidisciplinary Research

Section

Articles