RESEARCH ON SOIL PREPARATION FOR VEGETABLE CROPPING SYSTEMS IN UZBEKISTAN
Keywords:
soil preparation technologies; vegetable cropping systems; tillage practices; disc-based implements; resource-saving agricultureAbstract
Research on soil preparation technologies for vegetable cropping systems has been actively conducted in Uzbekistan due to the country’s specific agro-climatic conditions, including arid climate, irrigated agriculture, and diverse soil types. Over the past decades, Uzbek researchers have focused on adapting tillage practices and soil preparation machinery to local conditions in order to improve crop establishment and production efficiency. National studies have addressed the development of various tillage tools, including chisels, subsoilers, disc-based implements, and combined soil preparation units, with particular emphasis on reducing the number of field operations and energy consumption. In addition, agro-technical studies have examined the role of soil preparation depth, operational sequences, and integration with irrigation practices in vegetable production systems. Recent research trends in Uzbekistan increasingly emphasize resource-saving and combined tillage technologies aimed at minimizing soil disturbance while maintaining favorable seedbed conditions. However, despite substantial national experience, the results of these studies remain limited in international visibility and are often not systematically compared with global research outcomes. This paper provides an overview of soil preparation research for vegetable crops conducted in Uzbekistan, highlights key scientific contributions, and identifies existing research gaps that require further investigation within an international research framework.
References
Komilov, N. M. (2018). Improvement and substantiation of parameters of the working parts of a ridge former–fertilizer applicator. PhD dissertation in Technical Sciences. Tashkent, 120 p.
Komilov, N. M. (2010). Draft resistance of a working tool for simultaneous fertilizer application during ridge formation. Scientific and Technical Journal of Fergana Polytechnic Institute, No. 2, pp. 32–35.
Abdulkhayev, X. G. (2018). Substantiation of parameters of a device for ridge cultivation. PhD dissertation in Technical Sciences. Tashkent, 115 p.
A.C. 1535561. Orudie dlja podelki grjad i grebnej pochvy/ Ikramov Zh., P.Karshibaev E., Kurvantaev R., Emgirov G.// B.I. –1991. – № 2.
Kunduzov S.A. Obosnovanie parametrov borozdoreza dlja formirovanija posevnyh borozd pri poseve bahchevyh kul'tur pod plenku: Avtoref. dis. … kand. tehn. nauk. –Jangijul', 1997. –S. 66-73.
Kunduzov S.A. Obosnovanie parametrov borozdoreza dlja formirovanija posevnyh borozd pri poseve bahchevyh kul'tur pod plenku: Avtoref. dis. … kand. tehn. nauk. –Jangijul', 1997. –S. 66-73.
Mamarasulova, M. T. (2021). Substantiation of the type and parameters of a roller machine for sequential tillage of ploughed fields. PhD dissertation in Technical Sciences. Namangan, 110 p.
Ravshanov, K., Fayzullaev, K., Ismoilov, I., Irgashev, D., Mamatov, S., & Mardonov, S. (2020, July). The machine for the preparation of the soil in sowing of plow crops under film. In IOP Conference Series: Materials Science and Engineering (Vol. 883, No. 1, p. 012138). IOP Publishing.
Fayzullaev K. et al. Study on mechanisms of tillage for melon cultivation under the film //E3S Web of Conferences. – EDP Sciences, 2021. – Т. 304. – С. 03012.
Fayzullayev K. et al. Raking plates of the combination machine's subsoiler //E3S Web of Conferences. – EDP Sciences, 2021. – Т. 264. – С. 04039.
Irgashev D. et al. Placement of working bodies on the frame of the tool plow-ripper //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 390. – С. 01036.
Irgashev D., Mamadiyorov O., Xidirov M. Technical analysis of the disk working bodies that work the soil and them working between the garden row //Science and innovation. – 2022. – Т. 1. – №. A5. – С. 150-155.
Irgashev D. B. Basing the Constructional Parameters of the Plug-Softener that Works Between the Garden Rows. – 2024.
Mamatov F. et al. Justification of the bottom softening parameters of working organ with a sloping column //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 434. – С. 03010.
Mamatov F. et al. Justification of the bottom softening parameters of working organ with a sloping column //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 434. – С. 03010.
Irgashev Dilmurod Begmurodovich I. D. B. Theoretical Basis of Leveling Tillage in A Paraplow-Type Slanted-Column Chisel Plow //Theoretical Basis of Leveling Tillage in A Paraplow-Type Slanted-Column Chisel Plow. – 2025. – Т. 7. – №. 3. – С. 168-175.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
